TEICH-AIRE MANUAL
2
Thank you for purchasing this Teich-Aire rocking piston oil-less compressor. It is manufactured to the
highest standards using quality materials. Please follow all recommended maintenance, operational, and
safety instructions, and you will receive years of trouble-free service.
IMPORTANT: PLEASE READ THIS MANUAL AND SAVE FOR FUTURE REFERENCE.
Rocking Piston Compressor
Model
Serial No.
Air Flow
cfm
Max pressure
psi
Voltage
V
Hz
Amp
Phase
Single
Kw
RPM
To avoid accidents, use only as described in this manual.
• Pump only clean, dry air.
• Operate at 32 °F – 104 °F (0 °C to 40 °C).
• Protect the unit from dirt and moisture.
•
Do not pump flammable or explosive gases or use in an environment that contains such gases.
•
Protect all surrounding items from exhaust air. Exhaust air can become very hot.
• Corrosive gases and particulate material will damage the unit. Keep free of any water vapor, oil-based
contaminants, or other liquids.
• This pump is oil-less and requires no lubrication.
Correct installation is your responsibility. Ensure
proper installation conditions and installation clear-
ances for sufficient airflow.
• Install the compressor in a clean, dry location.
• Ensure the compressor is protected from dirt,
moisture, and harmful elements of the outdoor
environment.
• Ambient air temperature (readings taken 4” away
from any surface of the compressor) must not
exceed 104 °F (40 °C).
• Ensure that adequate ventilation and cooling air
(flowing across the compressor) is available to
keep the compressor from overheating, which can
cause premature damage.
• Mount the compressor to a stable, rigid operating
surface. Using the provided shock mounts will
reduce noise and vibration.
•
Kasco offers a simple, durable bracket accessory
that will allow you to easily mount the compressor
to a wall, floor, or bench. Please contact your Kas
-
co distributor and ask for the compressor mount
kit appropriate for the voltage of your compres-
sor (Part #771250 for 120V and Part #771260 for
240V).
PRODUCT OVERVIEW
Important Product Use Information
Installation Requirements
WARNING
Disconnect electrical power at the circuit breaker
or fuse box before installing this product.
Install this product where it will not come into
contact with water or other liquids.
Install this product where it will be protected
from harmful weather.
Electrically ground this product.
Failure to follow these instructions can result in
fire, electrical shock, or death.
Electrical Shock Hazard
Electrical Shock Hazard
Plumbing
To facilitate future technical
assistance and/or parts orders,
please copy the details from the
compressor nameplate onto this
page and save for future reference.
Back to Contents
