SM-100 CERTISAFE™ SUSPENDED MOUNT
MANUAL
852112 / 2021.1.1
11
CABLE SUPPORT
1.
Attach the cable support (Q) to the connecting link (N).
2. Close and tighten the connecting link.
3.
Feed power cable through the cable support (Q).
Fig. 17
4.
Continue to feed power cable through the cord grip (O) and out of the tank
until all excess cord length has been taken up, leaving only enough so that
there is no strain on the cable.
5.
Tighten the top nut on the cord grip (O) to seal the power cable penetration.
6.
Terminate the power cable into an exterior junction box (not supplied by
Kasco).
Fig. 16
Q
N
Fig. 18
O
Back to Contents
