Kasco 8400JF, Инструкция пользователя

Страница: 4 / 28

4
• #10 x 1” long or longer screw(s) for mounting the
control panel (4)
• 7/16” Socket & Wrench (1)
• 7/16” Wrench (1)
• 9/16” Socket & Wrench (1)
• 9/16” Wrench or adjustable crescent wrench (1)
• Flat head screw driver (1)
Assembly Instructions
1. Remove all contents from package and place on
a clean, flat surface. Inspect the shipment for any
damages. If damages are found, immediately notify
your carrier and your Kasco Marine, Inc. representa-
tive. Next, cross reference the parts included in the
shipment with the Parts Included sheet in this manual.
Make sure you have all the parts needed. If any short-
ages are found, contact your Kasco representative
immediately.
2. Arrange the three Float Sections (Part #B1) upright
(plug on bottom) so the overlap of one section aligns
with the next section and loosely push the three sec-
tions together to form a continuous ring.
8400JF, 3.1JF, 2.3JF, 3.3JF
5.1JF, 5.3JF, 7.3JF
Control Panel in separate box (1) (if purchased)
Set of Interchangeable Nozzles (5) (Diagrams)
# Item Part # Qty
1 #6 x 1/2” Self Tap Screw 820405 3
2 3/8” x 4” bolt 820090 1
3a Linden Nozzle (2, 3 HP) 820110 1
3b Linden Nozzle (5 HP) 820109 1
3c Linden Nozzle (7.5 HP) 703320 1
4a Redwood Y Insert (2 HP) (in #7) 820170 1
4b Redwood Y Insert (3 HP) (in #7) 820332 1
4c Redwood Y Insert (5 HP) (in #7) 820352 1
5 Juniper Nozzle 820140 1
6 Willow Nozzle 820150 1
7a Redwood/Spruce Nozzle (2 HP) 820160 1
7b Redwood/Spruce Nozzle (3 HP) 820330 1
7c Redwood/Spruce Nozzle (5 HP) 820350 1
8a Sequoia Nozzle (5 HP) 820130 1
8b Sequoia Nozzle (7.5 HP) 703200 1
9 3/8” x 2.5” Bolt 820095 1
8400JF, 3.1JF, 2.3JF, 3.3JF Nozzle Diagram
5.1JF, 5.3JF Nozzle Diagram
7.3JF Nozzles include linden and sequoia.
NOTE: Extra hardware may be included.
Tools & Supplies Needed
• Anchors or stakes for installing unit (3)
• Philips head screw driver for mounting C-85
• Electrical Supply near pond on a post with room
for mounting the control panel
• Three 12” galvanized pipe for weighting ropes
(optional)