manualshive.com logo in svg
background image

2

THANKS

We at Kasco Marine, Inc. would like to both thank and 

congratulate you on your purchase of the JF model 

aerating fountain.  We appreciate you choosing Kasco 

and for your purchase.  Your decision to purchase Kas-

co’s JF model Aerating Fountain will not disappoint 

you.  The JF model Aerating Fountain will be a great 

addition to your body of water.  It will help improve 

the water quality by adding much needed oxygen and 

circulation.  It will also enhance the aesthetics of the 

pond or lake with a beautiful fountain pattern.  The 

lighting package (if purchased) will illuminate your 

fountain for beauty at night.  We thank you for choos-

ing Kasco for your fountain needs and want you to be 

completely satisfied with your purchase.

Important Safety

Please read and follow these extremely important 

safety and handling instructions for your Kasco equip-

ment.  Following these instructions will help ensure 

your safety and the quality performance of your equip-

ment.

•  Under NO circumstances should anyone enter the 

water with the electrical equipment plugged in 

and/or in operation.  All Kasco equipment is ETL 

approved to UL and CSA standards for safety in 

water and all fountain models include control pan-

els with GFI protection.  However, it is NEVER 

recommended to enter the water with the equip-

ment in operation.

•  Caution should be used when dealing with any 

electrical equipment with moving parts.

•  NEVER run the unit out of water.  It will damage 

the seals and create a dangerous situation for the 

operator.

•  Extreme caution should be used around water, 

especially cold water, such as in Spring, Fall, and 

Winter, which poses a hazard in and of itself.

•  NEVER lift or drag the fountain by the power or 

light cord.  If you need to pull the unit to the side 

of the pond, use the anchoring ropes.

•  Do not use waders in deep ponds/lakes or ponds/

lakes with drop-offs, drastic slopes, or soft bottom 

material.

•  Do not use boats that tip easily for fountain in-

stallation, such as a canoe, and follow all boating 

safety rules and regulations, including wearing a 

PFD. (Personal Flotation Device)

•  The fountain is supplied with an internal ground-

ing conductor and a grounding-type attachment 

plug.  To reduce the risk of electrical shock, 

be certain that the fountain is plugged into the 

C-25 Control Box (120V) or C-85 Control Panel 

(240/208V) supplied by Kasco and that the C-25 

is plugged into a properly grounded, grounding 

type receptacle or the C-85 is wired properly.  The 

GFCI breakers should be tested upon each instal-

lation and every month thereafter to ensure proper 
operation.

General Instructions

INSPECT THE SHIPMENT

Immediately inspect your Kasco Fountain shipment 

for any visible damages.  Also cross reference the 

parts supplied with the Parts Included sheet to check 

for shortages.  Shortages should be reported immedi-

ately to your Kasco Marine distributor or representa-

tive and damages reported to your carrier and Kasco 

Marine.

CAUTION

WARNING:  Under NO circumstances should anyone 

enter the water with the unit in operation.  Always 

operate the unit in the water and keep people and ob-

jects clear of the propeller.  Do not lift or pull the unit 

by the electrical cord.  Always use extreme caution 

around electrical equipment and water situations.

ASSEMBLY & INSTALLATION

Please see the proper Assembly and Installation In-

structions enclosed in this manual.  Each is specific for 

your model and size of Fountain.  Note:  Use a nylon 

tie to help keep the power cords for the unit and lights 

free of the propeller by tying each cord to either side 

of the float. If you have a light kit, make sure that the 

unit cord is tied to one side of the float and the light 

cord to the other for balance.  Note: It is extremely 

important to test the GFI breaker in the control panel 

upon each installation/reinstallation of the unit to en-

sure proper functioning.

WARRANTY

Kasco Fountains are the result of over 40 years of 

design and engineering.  Kasco products are built to 

withstand the toughest conditions.  Kasco Marine 

Содержание 3400HJF

























Отзывы: