1/2HP-1HP AERATOR & CIRCULATOR MANUAL
6
ASSEMBLY INSTRUCTIONS (AERATOR, CONT.)
If you are
not
installing a mesh screen with your bottom screen, continue to step 10.
If you are
not
installing a bottom screen, continue to step 12.
5.
Wrap the flat mesh into a cone shape by overlapping both vertical edges by approximately 1 inch and
aligning the top and bottom edges of mesh.
6. Use three cable ties evenly spaced along the vertical seam to secure the mesh at the top, middle, and
bottom.
7. Center the stainless steel bottom screen inside the mesh cone with approximately 2 inches of mesh
above the steel screen's large ring.
8. Use three cable ties evenly spaced around the large ring to attach the mesh to the steel screen.
9. Use two cable ties placed opposite each other on the small ring to further secure the mesh to the
screen.
5
6
7
8
9
10.
Turn the unit upside down and position the bottom screen (H) flush with the float.
10
H
Back to Contents
