Kasco Aeration 3400HJF, Руководство пользователя, Страница: 9 / 24

9
Attach 2 cable ties
to bottom ring equally spaced
4. Clip off excess cable tie material once mesh is
secured into place. Go back to assembly instructions
to continue with connecting the bottom screen to the
fl oat.
Nozzle Options
NOTE: Pattern sizes listed are approximate. Varia-
tions in voltage caused by regional electrical differenc-
es or voltage drop due to long power cords may result
in reduced pattern sizes.
The Cypress is the only nozzle that uses the sepa- •
rate collar labeled C2.
The Cypress, Linden, Willow, and Juniper nozzles
•
use the 3/8” x 4” bolt.
The Sequoia nozzle uses the shorter 3/8” x 2.25”
•
bolt.
To install, simply drop the bolt through the nozzle and
thread into the top of the cone on the fountain.
Cypress Display :
The Cypress nozzle (marked C1 on fi n) makes use of
the collar (marked C2 on the top rim) and the 3/8” x
4” bolt.
Model Height Width
3400JF/HJF 6’ 16’
4400JF/HJF 7.5’ 25’
using (3) cable ties.
Overlap vertical edges
1 inch overlap
Attach 3 cable ties
2. Insert existing stainless steel screen centered inside
mesh cone with approximately 2 inches of mesh over-
lap to the top ring of the screen. Attach mesh to the
top ring of the screen in (3) equally spaced locations
using cable ties.
Attach 3 cable ties
to top ring equally spaced
2 inch overlap
3. Flip mesh and screen assembly over and use re-
maining cable ties to secure mesh to small bottom
diameter of the stainless steel ring.