51
ELECTRIC PRESSURE COOKER
washing, timely and correctly install them after washing, and then
dry the internal side of lid with cloth.
5. Wipe clean the cooker body with a rag, and it is prohibited to
soak the cooker body in water or spray water to it.
ELECTRICAL SCHEMATIC DIAGRAM
TROUBLESHOOTING
When followings occur, it is not the cooker fault, please carefully check
once before sending it for repair.
S/N
Problem
Reason
Solution
1
Difficult to close the lid
Sealing ring not installed
properly
Position the sealing ring well
The floater valve clamps the
push rod
Lightly push the push rod
2
Difficult to open the lid
Float valve in the popped-up
position
Press the float valve lightly with a
chopstick.
Pressure exists inside the
cooker
Open the lid after the pressure is
completely released.
3
Steam leaks from the lid
Sealing ring installed
improperly
Install the sealing ring as required
Food debris attached to the
sealing
Clean the sealing ring
Sealing ring damaged
Replace the sealing ring
The lid is not closed
correctly
Close the lid correctly
Содержание MY-CS600 4WPB
Страница 2: ......
Страница 107: ...107 AUTOCUISEUR ELECTRIQUE NOTES ...