OPERATING AND HANDLING
THE BRAVA POWER STRETCHER
6
shows that they are half charged and if they show red we are being warned that we
must recharge the batteries as they may soon stop working due to the low voltage
level.
Once both batteries have been installed the system will be powered by battery 1,
when this runs down, the system will automatically switch to battery 2. Both will
recharge when the stretcher is on the rail and inside the ambulance.
The level screen also shows us any possible system errors. In the following table we
will show all the incidences that the display can show.
CODE
LEDS
RED RED YELLO
W
YELLO
W
YELLO
W
GREEN GREEN GREEN GREEN
No error
0
Reserved
1
ON
Load tension error (ambulance entrance)
VERY LOW
2
ON
Load intensity error VERY HIGH
3
ON
ON
Error in battery charge due to lack of
ambulance tension or connection switch
4
ON
End of battery charge (by Vmax or time)
5
ON
ON
Reserved
6
ON
ON
Charge error due to low battery.
7
ON
ON
ON
Charge error due to exceeding the
maximum PWM duty cycle
8
ON
Upwards movement error due to excess
time.
9
ON
ON
Downwards movement error due to excess
time.
10
ON
ON
Engine failure due to exceeding maximum
intensity.
11
ON
ON
ON
Engine failure due to low tension.
12
ON
ON
Содержание BRAVA
