KARMETAL KMT 400 KSA, Руководство по эксплуатации

Страница: 25 / 51

25
CHAPTER VII: TROUBLESHOOTING
Some of the generally faced troubles and their possible causes and/or remedies are
presented in the following table.
PROBLEMS/FAULTS POSSIBLE CAUSES AND REMEDIES
Non-straight cuts
•
Insufficient blade tension
•
Incorrect or loose work stock clamping
•
Use coarser blade pitch
•
High feed rate or pressure
•
Tooth set damage
•
Guide arms are loose or set too far apart
Premature blade
breakage, premature
tooth wear and
chipped tooth
•
Feed rate too high or too low
•
Check your coolant
•
Check/adjust carbide blade pressure pads
•
Check wheel alignment
•
Allow enough clearance before starting cut
•
Reduce band tension when the machine isn’t
operated
•
Cutting speed too high
•
Wrong tooth pitch
•
Incorrect or loose work stock clamping
•
Ineffective coolant application
•
Improper break-in period
•
Perform scheduled maintenance
Despite taking all necessary action, if a fault persists, you should call the service