121
120
Electrical appliances
Electrical appliances
Problems can arise when lighting the gas at heights from 1000 m above sea level. This does not
mean that the refrigerator is not working properly.
¡
Selecting the cooling level
Push the acknowledgement button after turning the
refrigerator on. Press and hold the button for 2 sec-
onds.
The symbols for the energy sources start flashing.
Press the acknowledgement key again.
The display of the cooling level begins to flash. Use
the directional keys to select the desired cooling lev-
el.
Confirm your selection by pressing the acknowledge-
ment key.
At an ambient temperature between 15 and 25°C we recommend to set the cooling level at “3”.
At higher temperatures, the cooling level should be set higher. At lower temperatures, the cooling
level should be set lower.
¡
Condensate protection
To prevent the operating panel from misting up, the optional “Condensation protection” function
is automatically activated. This feature should only be deactivated at a low power level.
Lowest cooling level
Highest cooling level
Press and hold the two directional keys simulta-
neously for 2 seconds.
The “Condensation protection Off” symbol lights up. To reactivate the function, press the two
direction keys again for 2 seconds.
¡
Keeping quality of food
- Turn the refrigerator on approx. 12 hours before filling it and only fill it with foods that are
already pre-cooled.
- Always keep food in closed containers, wrap food in aluminium foil or similar wrappings.
- Do not put hot or warm food in the refrigerator, but wait until the food has cooled down.
- Never store food in the refrigerator which could emit volatile or ignitable gases.
- Delicate or perishable food must be placed directly next to the cooling elements.
- The freezer compartment is intended for ice-cream preparations and the short-term storage of
frozen food. It is not suitable for freezing food.
- Protect the refrigerator from direct sunlight.
- Keep in mind, if parking the vehicle in direct the sunlight, the increased indoor temperature may
adversely affect the power consumption and performance of the refrigerator.
- Always ensure unobstructed air circulation around the refrigerator.
¡
Defrosting
An ice layer on the cooling ribs reduces the cooling capacity and shortens the service life of the
refrigerator. Therefore, the refrigerator has an automatic defrosting system that prevents the
formation of ice.
However, the refrigerator can also occasionally be defrosted manually. Remove all food, wrap it in
newspaper, and store the food in a cool place or in an insulated container. Subsequently, remove
the drawer (models C1 and C2 only) and leave the doors refrigerator’s open. Place dry towels
inside the refrigerator to soak up the condensation water. After defrosting, wipe the interior
carefully.
Do not apply force or sharp objects to remove the ice layer. Do not use a hair dryer in order to
accelerate the defrosting of the refrigerator.
Содержание Dexter Dex 595 2017
