13
12
English
SOUND MODE
In sound-activation mode, thanks to the internal mic (8), the unit will
respond to low frequency music tones.
Press MENU(9) and select “SoUd”. Confirm with Enter (12)
DMX MODE
In a DMX 512 linking there are 512 channels available. Each DMX fixture
uses one or more channels to manage its functions. The user must assign
a starting address to each DMX fixture. This address will indicate the first
channel used on the controller. You have to plan the starting address
choice in order to avoid channels’ overlapping.Otherwise the fixture
wouldn’t work correctly. Example: If you need to connect 3 DMX fixtures,
each with 10 channels, the first unit is to be set on address 1, the second
unit on address 11 and the third one on address 21. Anyway you can set
the same starting address on more devices if you wish them to operate
in synchrony. DMX devices are conceived to receive datas through a
serial Daisy Chain connection. With this kind of linking the datas output
of a fixture is connected to the data input of the following one. The order
of linking of the devices is not important and it doesn’t affect on how the
controller manages each of them. We suggest to put them in the easiest
and most direct sequence for cable connection.
The cable length should not be more than 100 m to avoid interferences
with other signals or electric devices. A terminator is often required at the
end of a DMX system. Please address to a technician or to your reseller
for further information.
When you arrange the connections make sure that the fixtures and
the cables use the polarities indicated in the chart below
DMX Connector configuration
GROUND
