21
5.2.3.7
Using the largest Allen Wrench included in the KARMA Tool Kit, remove the
hex bolt and adjust the armrest width. (See Figure 5.12).
5.2.3.8
There are three holes to adjust the armrest width between 16", 18" or 20".
Please make the armrest symmetrical. Finally reinsert and tighten the hex
bolt, lower the seat and replace the front center knob bolt below the
driver's seat. This should add much comfort to you wheelchair.
5.2.4 Flip Back Armrest
5.2.4.1 By pressing Armrest Lock Joint lever, the armrest can be lifted backwards.
(Figure 5-22, Figure 5-23)
5.2.4.2 Use the #4 Allen key to loosen the screws. Adjust the armrest height and
re-tighten the screws. (Figure 5-24, Figure 5-25)
Figure 5.22
Figure 5.23
Figure 5.24
Figure 5.25
(Figure 5.7)
(Figure 5.8)
(Figure 5.9)
(Figure 5.10)
(Figure 5.11)
(Figure 5.12)
