60
7
Module error
(other than
Remote)
Check cables and connectors
Check modules
Replace LiNX Access Key
Power Module
Recharge battery
If the chair stalled, reverse away the chair or
remove any obstacles.
If the chair was moved while turned off, please
wait for a few seconds and switch on the power
again.
The battery gauge LEDs
Information
Batt Gauge Maximum is indicated on the battery
gauge with all LEDs lit and signifies that the battery
level is somewhere between 81 and 100% of full
capacity.
Batt Gauge Maximum
A low battery warning is generated when the
battery voltage falls below the Batt Gauge Low
Voltage Warning set-point. This is indicated on the
battery gauge with the red (left-most) LED flashing.
Batt Gauge Low Voltage
Warning
A high battery warning is generated when the
battery voltage goes above the Batt Gauge High
Voltage Warning set-point. This is indicated on the
battery gauge with all LEDs lit, and the two green
(right-most) LEDs flashing.
Batt Gauge High Voltage
Warning
Содержание eFlexx EFL-14
