39
Remove the battery from the wheelchair and connect the charger to it.
Be sure to follow the procedures listed below precisely.
6.2.2.1 Make sure the charger has been set to the correct voltage
setting(Figure6-1).
6.2.2.2 Power Switch is labeled with "I" and "O" symbols. The "I"
represents power on and the "O" represents power off.
6.2.2.3 The power of the charger is OFF when O ( labeled on the
button) is pressed down. (Figure6-2).
6.2.2.4 Connect the DC power cable of the charger to the charger
Socket of the battery(Figure6-9).
6.2.2.5 Connect the AC power cable of the charger to the AC
power socket(Figure6-4).
6.2.2.6 Ensure all cables are properly connected. Turn on the
charger as I ( labeled on the button) is pressed down.
(Figure6-5).
6.2.2.7 The green status indicator will be on when the charger is
turned on(Figure6-6).
6.2.2.8 The battery capacity indications show the battery level(e.g.
70%) (Figure6-7).
6.2.2.9 The charger begins charging the battery when the status
indicator stars flashing(Figure6-7)。.
6.2.2.10 Do not stop charging the battery before it is fully
charged.
6.2.2.11 The battery is fully charged when the status indicator
stops flashing and is always on. The battery capacity
indicators will indicate 100%(Figure6-8)。.
6.2.2.12 Turn off the charger as O ( labeled on the button) is
pressed down.
Содержание eFlexx EFL-14
