Temperature Display
*After the power is turned on, the clock will automatically detect the current room temperature and update the temperature every
60 seconds.
*Press the DOWN button for 2 seconds to switch between Celsius(°C) and Fahrenheit(°F)
Other Functions
Display Modes
Under clock, calendar or temperature mode, press the UP button to switch between Dp-1,Dp-2 and dP-3 display modes.
dp-1 mode:
LED alternately displays time and date. Time will display for 10 seconds, date will display for 2 seconds.
For example: press the UP button to enter the dp-1 Mode, after setting it return back to time display.
Under display mode, the LED display will alternate in the following sequence :
--> time(10 seconds) --> date(2 seconds) .
dp-2 mode:
Press the UP button to enter the dp-2 mode, set your desired mode(Time, Date or Alarm) to keep this mode
on the screen.
For example: press the UP button to enter to the dp-2 mode, after settings are finished it return back to time
display.
If you always want to keep Time display showing, press the SET button to enter Time mode, the screen will
keep Time display.
If you always want to keep Date display showing, press the SET button to enter Date mode, the screen will keep
the Date display.
If you always want to keep Alarm display showing, press the SET button to enter Alarm mode, the screen will
keep the Alarm display.
dp-3 mode:
Press the UP button to enter the dp-3 mode, under this mode, the screen default Time will always display after
15
seconds
For example: press the SET button to check Time-->Date-->Alarm as sequence, it will automaticly return back
to Time display after 15 seconds if there is no operation.
Power saving and Touch control mode
*The default mode is Sd (power saving off). Under Time Mode press the DOWN key to turn on the Power Saving Mode. The clock
will then display ‘oN Sd’, press DOWN again to turn off the Power Saving Mode.
*Under Power Saving Mode, without any operation for 10 seconds, the LED display will automatically turn off..
*Under Power Saving Mode touch the LED clock or touch the table to turn on the LED display.
*Under Power Saving Mode when alarm is ringing the LED display will automatically turn on.
Built in Time Memory
Built-in 1PC x CR2032 battery to keep the time running when power is off, but other functions cannot be used. If time memory
doesn’t work anymore, please replace the built-in battery behind the battery compartment.
