Operating through Smart Life
Download and install Smart Life APP.
Use your smart phone to scan the QR code below to download “Smart Life” App.
Run the “Smart Life” App and either register a new account or login with
your existing account and password. You will need to add your Smart
Aircooler to the same WiFi Router as your phone by following the below
instructions.
Open the App and click “Add Device” or “+” to add device, select “Small
Home Appliance” in the list of devices and tap “Aircooler” icon.
Make sure the power is connected to the appliance before using. Plug the
appliance into an AC 240V~50Hz mains outlet. Press and hold the power
button for 5 seconds. Ensure your phone is connected with your local
2.4GHz WIFI.
In OFF mode, press and hold the button for 5 seconds, the display will
show ”F” and until the “F” flashes rapidly. If not, try again. The network
connection is abnormal if the indicator flashes slowly, please check the
router or network configuration.
Click “Confirm light blinks rapidly”. Type in your WiFi password and click
“Confirm” to search device. Once the configuration is completed, the
indicator light will stop blinking rapidly.
Note: If the Aircooler is failed to establish connection, make sure there is no special symbol in
your WiFi name (it should only contain letters and numbers) and password, try again by
repeating step 4 and step 5 to set it up.
Once connected, you can rename your Aircooler and select the Room (e.g.
Living Room) where your Smart Aircooler is located. This helps you
identify the device when you want to cast to it.
You can tap the “Power icon” to turn on/off the cooler. Sliding Press “the
blue circle” to adjust the fan speed, Press “Oscillate” to adjust the Oscilla-
tion Press “Sleep” ,”Boost” or “Fresh” to select your want. Press “Time” ,
to set 1 to 8 hours.
Or search “Smart Life” in either Apple Store or
Google Play to download and install the App.
1
2
3
4
5
6
7