Installation instructions
BEFORE USING
Remove the exterior packing.
Check if there is any damage to the unit.
Clean the unit. A thorough cleaning with a recommended hob cleaner will provide
a clean, shiny coating on the hob surface.
INSTALLATION
Please follow our directions to prepare the countertop
cut
out:
A — 13 inches maximum depth of overhead cabinets
B — 36 inches is minimum height of countertop above floor
C — The minimum flat countertop surface that the cooktop will rest upon
must be equal to or greater than the overall cooktop dimensions
Please refer to the following page for overall cooktop dimensions
D — 30 inches minimum clearance between the top of the cooking surface
and the bottom of an unprotected wood or metal cabinet or 24 inches
minimum clearance when the bottom of wood or metal cabinet is
protected by not less than 1/4 - inch thick flame retardant millboard
covered with not less than No. 28 MSG sheet steel, 0.015-inch-thick
stainless steel, 0.024- inch-thick aluminum or 0.020-inch-thick copper.
E — 1 inch minimum from backsplash of countertop to edge of glass
Please refer to the following page for overall cooktop dimensions
NOTE: Do not install closer than 1/2 inch (12 mm) from any adjacent surface.
Please make sure there is enough space for cleaning and ventilation.
WARNING
To eliminate the risk of burns by reaching over heated surface units, avoid having
cabinet storage space located above surface units.
If cabinet storage is to be provided, the risk can be reduced by installing a range hood
that projects horizontally a minimum of 5" beyond the bottom of the cabinets.
