●
Please wipe off the water and oil stains on the panel before use.
(Note: water and stains will leave traces on the panel under high temperature, affecting the beauty
of the product)
●
Please do NOT use any plastic appliance on the induction cooker. The plastic will melt and stick
to the panel under high temperature.
1. Open
：
After plugging in the power supply, the induction hob will emit a beep. The indicator
lights will be on for 1 second and then lights out.
2
．
Ready
：
Press the "On/Off" button in open state, the beep will beep once, and the LED screen
will display "----". Now the hob is in ready.
3
．
Start
：
Press the "Function" button in ready state, the beep will beep once, the power indicator
will be on, and the LED screen will display 1000W. The stove will start heating at 1000W power.
4
．
Function selection
：①
Press the "Function" button over 3 sec to switch between the heating
states of temperature and power, and the power is preset to 1000W;
②
Press the "Function" button can choose the preset function mode.
5
．
Timer
：
Press the "Timer" button, the timer indicator light is on, and the LED screen will flashes
to display the time. The initial time is "0:00", press the button of "+" (increase) or "-" (reduce)
to adjust the time, the unit of click is 1 minute, and press the button over 3 sec the unit of click is
10 minutes. Maximum adjustable 4 hour. After 5 seconds it will automatically enter the timing
countdown. Press the "Timer" button for 2 sec to cancel the timer.
6
．
Adjust power / temperature
：
Press the "+" or "-" button to adjust the power and temperature, and
the LED screen displays the corresponding power.
7
．
Lock
：
Press the "Lock" button, a beep will sound, and the lock indicator light will be on. At this
time, all buttons except the On/Off are invalid. Press the "Lock" button for 3 sec to unlock.
1．Once the induction cooker is turned on, the glass panel will continue to
heat up. Please avoid direct contact between your body and the product.
2. The product will remain high temperature after use. Please unplug the plug
and let the product stand for 30 minutes to cool before cleaning or storage.
Operating instructions
