Instructions – 90001
For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST)
Page 1
* PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING, INSTALLING,
AND USING THIS PRODUCT. *
Warning
Always check for wires, fuel tanks and lines, brake lines and other important vehicle
functionality items prior to drilling and installing all products.
Too much weight will greatly reduce the stability of your vehicle. Kargo Master
makes no representation or warranty as to the amount of weight your vehicle can
safely carry. For guidance, we recommend that you consult the vehicle
manufacturer. AT NO TIME SHOULD THE WEIGHT OF THE VEHICLE, RACK, DRIVER,
PASSENGERS AND CARGO LOADED ON A KARGO MASTER RACK EXCEED EITHER THE
GROSS VEHICLE WEIGHT RATIO (GVWR) OR THE GROSS AXLE WEIGHT RATIO (GAWR)
AS SPECIFIED BY THE VEHICLE MANUFACTURER.
Do not use your rack with the rear cross bar removed. Removal of rear crossbar will
affect structural integrity of the rack.
Secure all payloads properly for safe transportation.
A large area is required to assemble rack. Be sure to keep area clear of trip and fall
hazards.
Before You Begin
Read all instructions prior to assembling or installing any Kargo Master product.
Follow each step in proper sequence, for ease and speed in assembling your Kargo Master rack.
PROPER SEALANT APPLICATION IS CRITICAL TO ENSURE SOLID ASSEMBLY, PREVENTING RATTLING, AND
WATER PENETRATION INSIDE THE RACK. Apply a healthy bead of sealant entirely around every swaged
joint and every bolt going through tubing. Improper sealing can lead to water penetration. Lack of
sealant and loose hardware can also lead to rattling.
Tools Needed
1/2”, 9/16”, 3/4” Sockets and Wrench
1/2”, 9/16”, 3/4” Box Wrenches
Rubber Mallet
5/16”*, 7/32” Hex Key Wrench
13/32” Drill Bit (optional)
Drill (optional)
*
Included
