Instructions – 4A96L
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 5
DO NOT EXCEED MANUFACTURERS WEIGHT CAPACITY FOR ROOF
Step 1 – Remove End Stops
If installed, remove end stops at the end of each bow, opposite from the
passenger side pan mechanism.
Repeat for both bows.
Step 2 – Install Latch Assembly
At the end of the rear bow, mount latch assembly
in the squares shown.
Use the 3rd set of square holes from the end of the
bow.
Mount using two 5/16” x 1” carriage bolts, two
5/16” flat washers and two 5/16” lock nuts.