Kargo Master 4A95M, Руководство по установке

Страница: 6 / 12

Assembly Instructions – 4A95M
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 5
Step 3 – Install Torque Tube Extension
If installation requires the torque tube extension, complete the following instruction. If NOT installing the
torque tube extension, skip to the next step.

Bolt the torque tube to the torque tube extension using a 1/4"-20 x 1” hex head bolt, two 1/4" flat
washers, and a 1/4"-20 lock nut at each location.

Repeat for second extension on opposite bow.
Step 4 – Install Torque Tube

Bolt the torque tube to the front and the rear bow using a 1/4" x 1” hex head bolt, two 1/4" flat washers
and a 1/4" lock nut at each of the 3 holes through triangular ends of torque tube and actuator on bow.

Repeat for second torque tube and extension on opposite side of rack.

Snug tighten but allow for movement. This hardware is best tighten after installation.
WITH EXTENSIONS