Installation Instructions – 4A934
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 8
Step 7 – Install Latch
Move rear pan assembly out of the
way to expose the end of the cross
member.
Bolt through the inside most set of
square holes as shown.
Bolt latch assembly to end of cross
member using 5/16” x 3/4" carriage
bolts, 5/16” flat washers and
5/16” lock nuts.
Shown without pan for clarity.
TIGHTEN bolts and nuts.
Step 8 – Install Handle
Remove the 5/16” x 2” flanged head screw, 5/16” washer, and 5/16” lock nut from front bow as shown.
Align the handle tube so holes in the hexagonal bar and handle tube line up.
Insert handle tube onto hex tube and fasten using 5/16” x 2” flanged head screw, 5/16” washer, and
5/16” lock nut.
TIGHTEN bolts and nuts.