Kargo Master 40983, Быстрый старт

Страница: 3 / 18

Step 4
Next attach the “Dampener” to the front and rear bow assembly. Make sure the “Torque Tube Pivot Assy.” is rotated so the cam is pointed
towards the center of the van. Attach the shaft end of the “Dampener” to the cam using the 5/16” pin, make sure the cotter pin is secure.
Now attach the body end to the “Dampener mounting Bracket” using the 5/16”x2 1/4” pin.
Step 5
Next install the “Axles” and “Rollers” at the end of both front and rear crossbow. The “Axle” just slides in and the “Rollers” slide
over the ends of the “Axle” as shown below. NOTE: There is NO latch on the “40983” like shown in this diagram.
3