For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 11
Installation Instructions
–
408TC
Installing Feet
•
Have rack assembled.
•
Measure width between the mounts on the van.
•
On the cross bows, use the slots that correspond to the measured distance between rails.
•
Bolt feet to bows as shown, DO NOT TIGHTEN at this point.
•
Feet can be installed as shown or reverse depending on how you mounted the rail.
•
Us
e a 3/8” x 3/4" hex head bolt, 3/8”
lock washers and a 3/8
”
flat washer to bolt feet to
crossmembers. Snug Tighten, but allow movement.
•
Design of feet may vary, but all mounting is the same.
**The tall feet will be installed on the rear bow**
