For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 10
Installation Instructions
–
408TC
Step 3B- EXT Front Mount
•
Locate other two threaded emboss at front of van. A plug will need to be removed.
•
Place the long mount rail with the tall flange to the center of the van.
•
Bolt through the farthest rear countersunk hole and the 2nd slot from the front using M8 x
45mm bolts with lock washers and flat washers.
•
The picture shown here is the rear most
mount on the rail. (through the countersunk
hole)
•
Passenger side shown, repeat on driver side.
•
Be sure to place sealant around the threads
and under the rubber pad to ensure no water
can leak into the cabin of the van.
•
Snug Tighten.