Karel MS128, Инструкция по установке и обслуживанию

Страница: 38 / 90

Karel MS128 Installation & Maintenance Guide
Edition 3.2
32
By way of the OP48(-H) or LT48(-H) telephones, several ISDN network messages
including the number of the calling party and call charge information can be
monitored. These network messages are also transferred to the CRL accessories.
Neither MS128 system nor IA12 ISDN Adaptor has internal S0 ports, so it is not
possible to connect an ISDN terminal to the extensions of MS128 system.
However, it is possible to connect another ISDN terminal in parallel with the IA12
ISDN Adaptor in the Point to Multi-Point lines with MSN facility.
The dimensions of IA12 are 10 cm x 21 cm x 7 cm and the weight is 0.9 kg.
The dimensions of EXP-IA12 are 9 cm x 8 cm.
II.8. LOCAL PAGER – PG100
PG100 Local Pager lets you page extensions that are equipped with receivers
(beepers) so that they can pick up their calls or attend later. The outlook of PG100
is illustrated in the following figure.
Figure A-24
KAREL also has its own beepers (receivers), which are adjusted to operate at the
same frequency of PG100 and which are also programmable for the desired
extension number as well as the PG100 Local Pager.
IMPORTANT
The operating frequency of PG100 Local Pager is 167.050 MHz. with a 25 KHz.
Bandwidth.
The coverage area of PG100 is 200 m indoor and 2 km open air.
The data cabling of PG100 Local Pager is made via the 6-pin RJ socket (the same
socket used by consoles) on the MS128 CPUKON Connection Card. The signaling
between the system and PG100 is illustrated in the following table :