Kärcher VC 4 Battery, Руководство пользователя

Страница: 23 / 72

– 10
Illustration
 Join handle and floor vacuum cleaner together.
ATTENTION
Do not crush the line.
Illustration
 Tighten screw.
Illustration
 Insert the floor nozzle into the floor vacuum cleaner
and engage.
Illustration
 Insert the barrel connector into the socket.
Push the cable into the pass-through.
Insert the power supply unit into the power outlet.
Illustration
 Insert the hand-held vacuum cleaner into the floor
vacuum cleaner and engage.
Illustration
 Place the floor vacuum cleaner onto the charging
station/base.
The charging process starts automatically.
Charger display
The charging state is indicated by 3 LEDs.
–
Flashing LEDS
The flashing LEDs indicate how much the battery has to
be charged.
Battery indicator
– 3 LEDs flashing - battery is empty.
The charging time is approx. 3-4 hours.
– 2 LEDs flashing - battery is 2/3 empty.
– 1 LED flashing - battery is 1/3 empty.
The charging process is complete when the LEDs no
longer flash.
Pull the power supply unit out of the power outlet after
the charging process.
Remove the floor vacuum cleaner from the base and
place it on the surface to be cleaned.
Illustration
 Press the ON/OFF button on the handle once.
The device runs at high speed.
 Press the ON/OFF button on the handle twice.
The device runs at low speed.
Note
All LEDs on the hand-held vacuum cleaner light up dur-
ing operation.
Pressing the ON/OFF button again switches the device
off.
Illustration
 Operate the lock.
 Tilt the hand-held vacuum cleaner backwards.
 Remove the hand-held vacuum cleaner towards
the top.
Using accessories
Illustration
 Attach the furniture nozzle.
For cleaning furniture and delicate objects, dusting
books, air vents in the car, etc.
 Attach the furniture brush to the furniture nozzle.
For cleaning upholstered furniture, mattresses, laced
curtains, etc.
Illustration
 Press the ON/OFF button on the hand-held vacu-
um cleaner once.
Note
All LEDs on the hand-held vacuum cleaner light up dur-
ing operation.
Pressing the ON/OFF button again switches the device
off.
Illustration
 Insert the hand-held vacuum cleaner into the floor
vacuum cleaner and engage.
Illustration
 Place the floor vacuum cleaner onto the base.
 Store the appliance in a dry room.
Illustration
 Press the lock upwards.
 Pull out the filter casing downwards and remove.
Illustration
 Pull out the fine filter and foam filter.
 Clean the fine filter and foam filter with water.
 Allow the fine filter and foam filter to dry completely.
Note
If the fine filter or foam filter cannot be cleaned, it must
be replaced.
Illustration
 Press the lock upwards.
 Pull out the filter casing downwards and remove.
Illustration
 Pull out the fine filter and foam filter.
Illustration
 Using the bar, pull out the coarse filter together with
the filter holder.
Illustration
 Using the bar, unlock the coarse filter and remove.
Illustration
 Clean the coarse filter and filter holder with water.
 Allow the coarse filter and filter holder to dry com-
pletely.
Illustration
 Empty the filter casing and rub down inside with a
cloth.
Operation
Start up
Charging process
Operation
Floor vacuum cleaner
Hand-held vacuum cleaner
Storing the Appliance
Care and maintenance
Cleaning the fine filter
Cleaning the coarse filter and emptying the
filter casing
23 EN