Kärcher SensoTimer ST6 eco!ogic, Руководство пользователя

Страница: 15 / 96

– 5
* depending on model
Î Figure 11
The setting process of sensor 2 starts
automatically after the atering setting
of ater outlet 1. If the ater outlet 1 re-
mains inactive, teaching of the ater
outlet 2 must be enabled by pressing
the OK button. The seconds countdo n
starts for ater outlet 2. Teaching of
sensor 2 is e uivalent to sensor 1.
ote: In order to change the operating
mode of an outlet or to add a sensor, the
teaching process must be restarted.
Î Remove the batteries from both sen-
sors and the control unit.
Î
Reinsert the battery in the control unit.
As soon as the symbols appear on the
display, press the
OK button until the
time on the display is flashing.
Î Reset the time and start the teaching
process of sensor 1, then of sensor 2.
Î Identical ith irrigation settings of a-
ter outlet 1 .
Î The menu button activates the settings
mode.
Î Arro keys select the ater outlet to be
set,
OK button starts the adjustment
cycle.
Î The settings remain saved even ithout
battery supply.
Valves can be opened manually:
Î The menu button activates the settings
mode.
Î Use the arro keys to select the tap and
confirm your selection ith the
OK but-
ton .
Î The valves are opened/closed by re-
peatedly pressing the arro keys.
Î The esc button terminates the manual
irrigation and s itches back into the au-
tomatic mode.
„ Can be activated in every mode (auto-
matic atering and 24h-function).
Î Hold the left arro key do n for at least
3 seconds in order to open the left valve
manually.
Depending on the scope of delivery, the
same procedure ith the right arro
key applies to open the right valve.
„ The valve is open.
Î Press the left/right arro key briefly in
order to close the opened valve or to
open it again.
If both valves are closed, the device au-
tomatically returns to the previous
mode after 30 seconds.
Î Terminate the manual atering by
means of the
OK button or esc/menu
button . The valve is closed and s itch-
es back into the automatic mode.
„ If the valve unit loses contact to a sen-
sor (no signal as, for example, the sen-
sor battery is empty), the atering is
time-controlled.
ote
ECO delay days are considered.
Advantage: Guarantee of continuous
atering, plants do not dry out.
reparation / teaching sensor 2*
Irrigation settings of water outlet 2
Further functions
Changing the settings of the water
outlets
Manual irrigation of the water
outlets
uick access manual watering
Failure safety function
15 EN