Kärcher SC 2 Premium, Руководство по эксплуатации

Страница: 10 / 16

10 English
Water needs to be filled into the boiler, if the
steam volume decreases during work and
no more steam is emitted in the end.
Note:
The safety lock cannot be opened as long
as slight pressure remains in the boiler.
 Disconnect the mains plug from the
socket.

Push the steam switch until steam dis-
charge stops. Now, the boiler of the ap-
pliance is unpressurized.
 Remove the safety lock from the de-
vice.
 Fill the boiler with a maximum of 1 liters
of fresh tap water.
 Screw the safety lock back onto the de-
vice.
 Insert the mains plug into a socket.
 The orange indicator lamp goes out af-
ter approximately 8 minutes.
The steam cleaner is ready to use.
Illustration
 Disconnect the mains plug from the
socket.
Illustration

Push the steam switch until steam dis-
charge stops. Now, the boiler of the ap-
pliance is unpressurized.
Illustration
–
Put the extension pipes into the large
accessory compartments.
–
Insert the manual nozzle and detail noz-
zle onto each extension pipe.
–
Put the round brush into the medium
acessory compartments.
–
Hook the floor nozzle into the parking
position.
–
Wrap the steam hose around the exten-
sion pipes and insert the steam pistol
into the floor nozzle.
It is recommended to sweep or vacuum the
floor prior to using the steam cleaner. This
way, the floor is already cleared of dirt/
loose particles prior to the wet cleaning.
Prior to treatment with the steam cleaner,
always check the reaction of the textiles in
an inconspicuous location: Steam at first,
then let dry and then check for colour or
shape changes.
When cleaning painted or plastic-coated
surfaces, as found on kitchen and living
room furniture, doors, parquet; wax, furni-
ture polish, plastic surfaces or paint can
come loose or stains can be created. When
cleaning these surfaces, briefly steam a
cloth and wipe the surfaces with it.
ATTENTION
Never direct the steam jet at glued edges
as the edge band may loosen. Do not use
the steam cleaner on unsealed wooden or
parquet floors.
In case of low outside temperatures, espe-
cially in the winter, warm up the window
pane by slightly steaming the entire glass
surface. This will prevent tensions on the
surface which might lead to glass break-
age.
Then clean the window surface with the
hand nozzle and attachment. Use a squee-
gee to remove the water or wipe the surfac-
es dry.
ATTENTION
Do not direct steam onto the sealed loca-
tions of the window frame to prevent dam-
age.
Refilling Water
Turning Off the Appliance
Storing the Appliance
How to Use the Accessories
Important application instructions
Cleaning floor surfaces
Refreshing textiles
Cleaning of Coated or Lacquered
Surfaces
Cleaning of Glass