Kärcher RLM 4, Инструкция по эксплуатации

Страница: 54 / 488

54 RLM 4 GB
7.7 Setting the secondary area mowing
1. or
* Sub zone mowing
2. Setting the mowing time periods:
■
or
inactive
:
Secondary area mowing is switched off.
■
or active :
The appliance mows until the recharge-
able battery is flat.
■
or
Mowing time in min
:
The appliance mows the secondary area
for the set time period. The following
mowing time periods can be set:
15/30/until rechargeable battery flat.
7.8 Setting the display contrast
If the display is difficult to read, e.g. in sunlight,
the display can be improved by changing the dis-
play contrast.
1. or
* Display contrast
2. Increase/decrease the display contrast with
or and accept with .
7.9 Setting lock
If the setting lock is deactivated, the PIN must on-
ly be entered when acknowledging safety-rele-
vant faults.
1. or
* Safety settings
2. Activating/deactivating the setting lock:
■
or Activate :
Activate the setting lock.
■
or Deactivate :
Deactivate the setting lock.
7.10 Recalibrating
If the position or length of the boundary cable has
been changed or the appliance no longer finds
the boundary cable, recalibration is necessary.
1. or
Reset calibration
2.
Reset loop calibration data?
3. Carrying out a calibration movement: see
chapter 5.4 "Carrying out an automatic cali-
bration movement", page 50
.
7.11 Restoring factory settings
The factory settings of the appliance can be re-
stored, e.g. before selling the appliance.
1. or * Factory reset
Appliance reports: Factory reset com-
pleted
8 DISPLAYING INFORMATION
The
Information
menu is used for displaying
machine data. No settings can be made in this
menu.
1. Call up the main menu with .
2. or
* Information
3. Select the menu item with or and ac-
cept with .
Note: The menu items are described in the
following sections.
4. Return to the main menu with .
Blades service
Shows in how many operating hours a blade ser-
vice is required. The counter can be reset manu-
ally. Have the blade service carried out by a
Kärcher dealer, technician or service partner.
Reset the counter for blade service:
1. or
Confirm
Hardware
Shows information on the appliance, such as
type, year of manufacture, operating hours, serial
identification number, number of mowing inserts,
total mowing time, number of charging cycles, to-
tal charging time, length of the loop of the bound-
ary cable.
Software
Shows the firmware version.
Program Info
Shows current settings such as the total weekly
mowing time.
Failures
Shows the fault messages that last occurred with
date, time and fault code.