Kärcher RC 3.000, Руководство пользователя

Страница: 27 / 399

– 13
Illustration
 Release the two screws on the two bat-
teries, and remove the old batteries.
 Insert the new batteries, and fasten
them with the screws.
Spare battery pack (1 ea.):
Order number: 4.810-012.0
The cleaning robot includes two built-in bat-
tery packs; please remove these before
disposing of the old appliance.
 Please arrange for the proper disposal
of the old appliance.
 Remove both battery packs of the
cleaning robot; see Chapter "
Replace
batteries “.
 Dispose of the batteries properly (at a
collection site or the dealer).
Finish all maintenance work on the
cleaning robot with the following steps:
 Installing the dirt receptacle cover:
Illustration
Put the cover onto the dirt receptacle.
Illustration
Close both locking levers.
In addition, press on the front side of
the cover to ensure the dirt receptacle
is closed safely.
Exchanging the batteries
Technical specifications
Station for cleaning robot
Operating voltage
1~50 Hz 220 - 240 V
Cleaning power 600 W
Sound level (quiet mode) 60 (54) dB(A)
Filter bag volume
2 l
Dimensions 500 x 250 x
230 mm
Weight 5,8 kg
Cleaning robot
Battery voltage 12 V
Battery capacity 1,7 Ah
Battery type NiMH
Battery charge time 10 - 20 min
Cleaning duration per bat-
tery charge up to 60 min
Dirt receptacle volume 0,2 l
Dimensions ø 280 x 105
mm
Weight 2,0 kg
27
28
Disposing of old device and
battery pack
Remove battery pack and dispose
of
Danger!
Do not open the battery
, as there is a risk
of an electrical short; also, irritating or
caustic vapors can escape.
Do not expose the battery to direct sun-
light, heat or fire
, there is a risk of explo-
sion.
27 EN