Kärcher Ranger 12, Руководство по эксплуатации

Страница: 8 / 52

8
Operation
Connecting and Operating Elements
11. Zipper
12. Sliders
13. Connecting device
14. Handle tube
15. Handle
16. Handle guide
20. On / Off-Switch
21. Height adjustment Brush
22. Bearing block right hand
23. Release button bearing block
24. Foot pedal
25. Filter bag connection
26. Brush roller
27. Mains Connector
Please Note: The dust bag housing cover cannot be
removed completely!
It has been omitted in the illustrations only to improve
clarity!
Assembly
Place the filter compartment (1) on the power head
(2) so that the connecting piece (13) reaches into the
corresponding opening. Open the zipper (11) of the
filter compartment by moving the two sliders (12) all
the way down to the right and to the left. Now secure
the connection of the two main assemblies with one
of the M5x30 screws (7) from the screw kit (6).
Insert the handle tube (14) into the grip (15), so that
the drilling in tube (19A) becomes visible through the
hole (19) in the handle (15). Secure this connection
with the M4x10 screw (9) out of the screw kit (6).
The handle assembly has to be inserted into the
lower part of the guide (17) (already assembled with
the filter bag housing) and will be secured with the
two remaining M5x30 screws (7).
Additional tasks have to be performed for mains
version.
Please refer to next page for details of cable installa-
tion and routing.
15
24
20
22
23
16
14
16
12
11
21
13
27
19A
19
18
7
2
13
12
14
15
15
14
7
8
1
17
25
86452440 Manual Ranger 12 120V 60Hz