Kärcher Puzzi 8/1, Инструкция по эксплуатации

Страница: 5 / 36

English 5
Contents
IMPORTANT
SAFETY
INSTRUCTIONS
When using an electrical machine, ba-
sic precautions should always be fol-
lowed, including the following:
READ ALL IN-
STRUCTIONS BE-
FORE USING
THIS MACHINE
● Inform your dealer immediately if
there is any shipping damage.
● Completely remove the accessories
from the box.
● The machine is not suitable for suck-
ing up hazardous dusts as asbestos.
Please consult your KÄRCHER
branch or your KÄRCHER dealer
with regard to such applications.
● Only operate the appliance from a
grounded outlet. Refer to the Tech-
nical data for the necessary main
fuse.
SAVE THESE IN-
STRUCTIONS
This appliance is intended for com-
mercial use.
SAFETY IN-
STRUCTIONS
몇
WARNING
To reduce the risk of fire, electric
shock, or injury:
1 DISCONNECT APPLIANCE FROM
POWER CIRCUIT before removing
the cover, performing maintenance
work, and when not in use.
2 DO NOT LEAVE the machine unat-
tended when plugged in.
3 ALWAYS CHECK THE POWER
SUPPLY CORD for damage or signs
of any aging before each use.
4 DO NOT PULL OR CARRY APPLI-
ANCE BY CORD. Do not use cord
as a handle. Keep cord away from
heated surfaces or fire. Do not close
door on cord or pull cord around
sharp edges.
5 KEEP CORD AWAY FROM HEAT
AND OIL. Do not leave cord lying
around after job is complete. It can
become a tripping hazard.
6 DO NOT RUN MACHINE OVER
CORD.
7 TURN SWITCH TO OFF before un-
plugging power supply cord.
8 DO NOT UNPLUG BY PULLING
CORD. To unplug, grasp plug, not
cord.
9 DO NOT GRASP PLUG WITH WET
HANDS.
IMPORTANT SAFETY INSTRUC-
TIONS ................................................ 5
General notes .................................... 6
Environmental protection ................... 7
Hazard levels ..................................... 7
Intended use ...................................... 7
Overview of the device....................... 7
Start-up .............................................. 8
Operation ........................................... 9
Cleaning methods .............................. 10
Transport............................................ 11
Storage .............................................. 11
Care and service................................ 11
Troubleshooting guide........................ 11
Warranty............................................. 12
Accessories and spare parts.............. 12
Technical data .................................... 13