English
5.906-492.0 Rev. 00 (12/10)
11
1 Power cord
2 Ferrit ring (anti-interference ring)
3 Power switch
4 Cord grip
Remove the traction relief.
Remove the mains cable from the cable guide.
Pull the mains cable out of the appliance switch.
Install the new mains cable in reverse sequence.
1 Electrodes
2 Connecting cable for electrodes
3 Control chip
Disconnect the connecting cables from the circuit
board and the electrodes.
Replace damaged connecting cables.
Replace the electrodes.
Install new connecting cables in reverse se-
quence.
Note:
The connecting cable must be routed as
shown in the illustration within the respective pins.
5.6.2 NT 14/1 Classic
5.7
Replace the electrodes
1
2
2
1
3
