8
5.959-660
3. Assembling for the first time
Assemble your suction unit as follows.
• Open both container locks and lift off the motor
housing.
• To suck dry, push the enclosed paper filter bag
onto the suction neck.
- Hold the filter by the card only.
• Invert the dirt container.
• Press both steering rollers into the holes provi-
ded until they latch into position.
• Push the axle of the wheels into the guide.
To do this, first push the bearing disks to the
outside left and right to the wheels.
If necessary, push back the parking brake.
• Fit the holder for the vacuum pipes and the ac-
cessories.
• Place the motor housing onto the dirt container
and close.
4. Putting into operation
Prepare your suction unit for operation as
follows.
• Twist the vacuum hose into the suction hose
connection (bayonet joint)..
• Connect the two vacuum pipes and the elbow
together correctly and then connect them to
the vacuum hose
• Fit the required nozzle onto the vacuum pipe
(see accessories).
BT_660GB.PM6
08.02.01, 14:10
8
