32
Troubleshooting Information
KMR 1250 B, LPG, D
Adjust parking brake
Note:
With the parking brake released, there must
be NO braking effect, and the wire and cas-
ing cable (1) must be fully relaxed.
The parking brake is required to securely hold
the unit in place when applied on a grade of 25%,
and with the unit loaded to capacity.
At the same time, tension (X) of the pull spring (7)
may not extend by more than 5 to 10 mm (0.20-
0.40 in).
Brake adjustment is accomplished with adjust-
ing nut (5).
-
Starting with serial no. 10600, a pull
spring is installed on the operating lever
(9). This ensures a more easy movement
of the brake when the operating lever (9)
is actuated.
Adjusting parking brake
Adjusting parking brake
Parking brake w/ pull spring
Parking Brake – No Function
1
Wire and casing cable
2
Brake caliper
3
Brake piston
4
Brake pulley
5
Adjusting nut
6
Brake lever
7
Pull spring
8
Pull spring
9
Operating lever, parking brake
10
Pull spring
X
2
3
5
4
6
1
7
X
1
2
3
5
4
6 7
8
1
9
10
10
