Kärcher KM 85/50 W Comfort, Руководство по эксплуатации

Страница: 15 / 18

Operating Instructions KM 85/50 W Comfort / KM 85/50 W Classic / KM 85/50 W P Comfort / KM 85/50 W P Classic English
30
! Readjust the sealing strip
downwards by relocating it in the
elongated hole
! Tighten the fastening screws of
the sealing strip
! Set the vacuum sweeper upright
and push it slightly forwards
— The clearance of the front sealing
strip to the floor must be set so
that its whole width folds back
with a lag of 10 - 15 mm
! Repeat the adjustment as
required
Note:
— The sealing strip must be
replaced if, due to being too
worn, the clearance of the front
sealing strip to the floor can no
longer be adjusted
! Unscrew the fastening screws
and replace the whole sealing
strip
Rear sealing strip
! Remove the swept material
container
!
Undo screws of sealing strip at
the debris container
!
Replace sealing strip
!
Tighten screws of sealing strip
Side sealing strips
! Loosen the fastening of the
sealing strip
! Replace sealing strip
! To adjust clearance to floor push
a 1 - 2 mm thick spacer under it
! Align the sealing strip
! Tighten the fastenings of the
sealing strip
Replace the dust filter
Danger!
! Empty and remove debris
container prior to starting to
replace the dust filter
! Wear a dust protection mask
when working on the filter system
! Observe the safety precautions
for handling fine dust
! Lock the hand brake
! Remove safety cotter pin of the
shaker rod
!
Pull out rod.
! Loosen fastening screws.
! Remove frame
! Replace the dust filter
Note:
Make sure when mounting the new
filter that the lamella are not
damaged