background image

     - 

6

See inspection checklist 5.950-646.0!
Note:

 The elapsed-time counter shows the 

timing of the maintenance intervals.

Note:

 Where maintenance is carried out by 

the customer, all service and maintenance 
work must be undertaken by a qualified 
specialist. If required, a specialised Kärch-
er dealer may be contacted at any time.

Daily maintenance:

Check engine oil level.

Check cooler water level.

Check tyre pressure.

Check the sweeping roller and the side 
brush for wear and wrapped belts.

Refill the fuel tank.

Check fuel filter.

Check the centrifugal separator and the 
air filter, clean if required.

Check function of all operator control el-
ements.

Check appliance for damages.

Weekly maintenance:

Clean the water cooler.

Clean the hydraulic oil cooler.

Check hydraulic unit.

Check the hydraulic oil level.

Check brake fluid status. 

Check the pad for wear, replace if re-
quired.

Check the container lid and lubricate it.

Maintenance to be carried out every 50 
operating hours:

Drain the water from the diesel/water 
separator.

Maintenance following wear:

Replace sealing strips.

Readjust the side seals or replace 
them. 

Replace roller brush.

Replace side brush.

Note:

 For description, see section on Main-

tenance work.

Maintenance to be carried out after 50 
operating hours:

Have the first inspection done accord-
ing to the service manual.

Maintenance to be carried out after 250 
operating hours:

Have the inspection done according to 
the service manual.

Note:

 In order to safeguard warranty 

claims, all service and maintenance work 
during the warranty period must be carried 
out by the authorised Kärcher Customer 
Service in accordance with the mainte-
nance booklet.

Preparation:

Park the sweeper on an even surface.

Turn ignition key to "0" and remove it.

Lock parking brake.

1

Oil dipstick

2

3-Cylinder diesel engine

3

Hydraulic oil fill neck

4

Cooling water container

5

Centrifugal separator

6

Fuel container

7

Battery

8

Fuel container lid

9

Hydraulic oil tank

10 Looking glass
11 Water cooler

Danger

Risk of injury! Always apply the safety bar 
when the waste container is raised.

1

Holder of safety rod

2

Safety rod

Fold the safety rod for the high empty-
ing up and insert it into the holder (se-
cured).

Please observe the following warning notes 
when handling batteries:

Danger

Risk of explosion! Do not put tools or similar 
on the battery, i.e. on the terminal poles 
and cell connectors.

Danger

Risk of injury! Ensure that wounds never 
come into contact with lead. Always clean 
your hands after having worked with batter-
ies.

Danger

Risk of fire and explosion!

Smoking and naked flames are strictly 
prohibited. 

Rooms where batteries are charged 
must have good ventilation because 
highly explosive gas is emitted during 
charging. 

Danger

Danger of causticization!

Maintenance intervals

Maintenance by the customer

Maintenance by Customer Service

Maintenance Works

Overview

General notes on safety

Please do not release engine 
oil, fuel oil, diesel and petrol 
into the environment. Protect 
the ground and dispose of 
used oil in an environmentally-
clean manner.

Safety notes regarding the batteries

Observe the directions on the 
battery, in the instructions for 
use and in the vehicle operat-
ing instructions!

Wear an eye shield!

Keep away children from acid 
and batteries!

Risk of explosion!

Fire, sparks, open light, and 
smoking not allowed!

Danger of causticization!

First aid!

Warning note!

Disposal!

Do not throw the battery in the 
dustbin!

8

EN

Содержание KM 130/300 R D


















Отзывы: