Kärcher KHD 4 L, Руководство пользователя

Страница: 12 / 84

12 English
This high pressure cleaner is designed for domestic use
only.
–
for cleaning machines, vehicles, buildings, tools,
facades, terraces, gardening tools, etc. by means
of a high-pressure water jet (if necessary, with ad-
ditional cleaning agents).
– with accessories, replacement parts and cleaning
agents approved by KÄRCHER. Please observe
the information accompanying the cleaning agents.
Only use original accessories and spare parts, they en-
sure the safe and trouble-free operation of the device.
For information about accessories and spare parts,
please visit www.kaercher.com.
Notes about the ingredients (REACH)
You will find current information about the ingredients
at:
www.kaercher.com/REACH
The scope of delivery of your appliance is illustrated on
the packaging. Check the contents of the appliance for
completeness when unpacking.
In the event of missing accessories or any transport
damage, please contact your dealer.
Illustrations on Page 2
1 High pressure connection
2 Appliance switch „0/OFF“ / „I/ON“
3 Storage for trigger gun
4 Transport handle
5 Storage for foam nozzle
6 Storage for high pressure hose
7 Water connection with integrated sieve
8 Coupling element for water connection
9 Hooks for fastening the net
10 Accessory net
11 Mains cable with mains plug
12 Bearing wheel
13 Trigger gun
14 Lock trigger gun
15 Button for detaching the high-pressure hose from
the trigger gun
16 High pressure hose
17 Spray lance with pressure regulation (Vario Power)
Carrying out the most common cleaning tasks.
The working pressure can be continuously in-
creased from "SOFT" to "HARD". To adjust the
working pressure, release the trigger gun lever and
turn the spray lance to the desired position.
18 Spray lance with Dirtblaster
For strong contaminations.
19 Washing brush
Suitable for use with detergents.
20 Foam nozzle with detergent container
With powerful foam for effortless cleaning.
Mount loose parts delivered with appliance prior to start-
up.
Illustrations on Page 3
Illustration
 Slide the transport handle into the guide and se-
cure it with 2 screws.
Illustration
 Insert holder for trigger gun.
Illustration
 Screw the coupling element to the water connec-
tion on the appliance.
Illustration
 Hook the accessories net into the hooks shown in
the illustration.
Illustration
 Push the high pressure hose into the trigger gun
until it locks audibly.
Note: Make sure the connection nipple is aligned
correctly.
 Check the secure connection by pulling on the high
pressure hose.
Proper use
Accessories and Spare Parts
Environmental protection
The packaging material can be recycled. Please
arrange for the environmentally appropriate dis-
posal of the packaging.
Old appliances contain valuable recyclable mate-
rials that should be recycled properly. Batteries
and accumulators contain substances that must
not enter the environment. Please dispose of old
devices and batteries or accumulators in an envi-
ronmentally friendly way.
Electrical and electronic devices often contain
components which could potentially pose a dan-
ger to human health and the environment if han-
dled or disposed of incorrectly. However, these
components are necessary for the proper opera-
tion of the device. Devices marked with this sym-
bol must not be disposed of with regular house-
hold rubbish.
Cleaning operations which produce oily waste wa-
ter, e.g. engine washes, underbody washes, may
only be carried out using washing stations
equipped with an oil separator.
Work with detergents must only be performed on
liquid-tight work surfaces with a connection to the
sewer system. Do not let release detergent into
waters or earth.
Description of the Appliance
** Additionally required
21 Fabric-reinforced water hose with commercially
available coupling.
– Minimum diameter, 1/2 inches (13 mm).
– Minimum length 7.5 m.
Assembly