Kärcher K 5 Premium Smart Control, Руководство пользователя

Страница: 12 / 64

12 English
7. Press the "+" button and the "-" but-
ton on the high-pressure gun simul-
taneously for at least 3 seconds.
If pairing is successful, the pressure
stages as well as the radio and Blue-
tooth
®
symbol are shown on the dis-
play.
The Bluetooth
®
connection between
the mobile unit and the high-pres-
sure cleaner is established automat-
ically.
Note
If required, you can also establish the
Bluetooth
®
connection subsequently
by pressing the "-" key for 10 s.
8. If the pairing attempt failed:
a Pull the mains plug of the high-
pressure cleaner out of the socket.
b Wait 20 seconds.
c Pair the high-pressure gun again.
Initial startup
1. Place the device on a level surface.
2. Completely unwind the high-pres-
sure hose from the hose reel.
3. Pull the high-pressure hose com-
pletely forward through the hose
guide.
4. Insert the high-pressure hose into
the high-pressure gun until it audibly
clicks into place.
Note
Make sure the nipple is oriented cor-
rectly.
5. Check the secure connection by
pulling on the high-pressure hose.
6. Insert the mains plug into an outlet.
Water supply
For connected loads, see type plate or
chapter
Technical data .
Observe the instructions of the water
supply company.
ATTENTION
Damage due to contaminated water
Contaminated water can damage the
pump and accessories.
For protection, KÄRCHER recom-
mends the use of the KÄRCHER water
filter (special accessory, order number
4.730-059).