background image

English

 7

Î

Turn the spray lance to "Mix" position - low 
pressure.

Î

Fill the detergent solution in the detergent 
tank (observe dosage instructions on the 
packaging of the detergent).

Î

Adjust the suction volume of the detergent 
solution by means of the dosage regulator 
for detergents.
Turning the regulator to the left: Additional 
dosage from the left detergent tank.
Turning regulator to the right: Additional 
dosage from the right detergent tank.

Î

Spray the detergent sparingly on the dry 
surface and allow it to react, but not to dry.

Î

Spray off loosened dirt with the high-pres-
sure ray.

Î

Release the lever on the trigger gun.

Î

Lock the lever on the trigger gun.

Î

During longer breaks (more than 5 min-
utes), also turn the appliance off using the 
"0/OFF" switch.

Î

Insert the trigger gun in its holder.

Caution

Only separate the high-pressure hose from 
the hand spray gun or the appliance while 
there is no pressure in the system.

Î

After working with detergent, suspend de-
tergent suction hose in a container filled 
with clear water, switch the appliance on 
for around 1 minute once the spray lance 
has been removed and rinse until water 
runs clear.

Î

Release the lever on the trigger gun.

Î

Turn off the appliance "0/OFF".

Î

Turn off tap.

Î

Detach the appliance from the water sup-
ply.

Î

Press the lever on the trigger gun to re-
lease any remaining pressure in the sys-
tem.

Î

Lock the lever on the trigger gun.

Î

Pull out the mains plug.

Î

Roll up the power cord and loop it e.g. 
round the handle.

Î

Insert the trigger gun in its holder.

Î

Stow away the accessories in the acces-
sory holder.

Î

Suspend the high-pressure hose into its 
holder.

Î

If detergent has been added: Suspend de-
tergent suction hose in a container filled 
with clear water, switch the appliance on 
for around 1 minute once the spray lance 
has been removed and rinse until water 
runs clear.

Î

Release the lever on the trigger gun.

Î

Switch the appliance switch to "0/OFF“.

Î

Turn off tap.

Î

Press the lever on the trigger gun to re-
lease any remaining pressure in the sys-
tem.

Î

Disconnect the appliance from the water 
supply.

Î

Detach spray lance from the trigger gun. 

Î

Briefly switch the appliance on ("I/ON“), 
press the trigger gun lever until no further 
water is discharged (approx. 1 min).

Î

Switch the appliance switch to "0/OFF“.

Î

Use the safety catch to secure the trigger 
gun lever.

Î

Pull out the mains plug.

Î

Store the power cord, the HP hose and the 
accessories on the appliance.

Recommended cleaning method

Interrupting operation

Finish operation

Finish operation

Содержание K 4













Отзывы: