Kärcher K 3.00 EcoSilent, Руководство пользователя

Страница: 16 / 212

– 6
 Stow away the mains cable and accesso-
ry at the machine. Store the appliance in a
dry room.
Caution
Protect the appliance and its accessories
against frost.
The appliance and its accessories can get de-
stroyed through frost if there are any water
residues in them. To avoid damage to them:
Completely drain all water from the appliance:

Detach the appliance from the water supply.
 Detach spray lance from the trigger gun.
 Switch the appliance on ("I/ON“), press the
trigger gun lever until no further water is dis-
charged (approx. 1 min).
 Turn off the appliance.
 Store the appliance and the entire accesso-
ries in a frost-safe room.

Danger
Turn off the appliance and remove the mains
plug prior to any care and maintenance work.
The appliance is maintenance-free.
Prior to longer periods of storage, e.g. in the
winter:
 Completely drain all water from the appli-
ance:
(for a description, see section on "Frost
protection")
 Remove filter from suction hose for deter-
gent and clean under running water.
 Pull out the sieve in the water connection
using flat-nose pliers and clean under run-
ning water.
Use only original KÄRCHER spare parts. You
will find a list of spare parts at the end of these
operating instructions.
You can rectify minor faults yourself with the
help of the following overview.
If in doubt, please consult the authorized cus-
tomer service.

Danger
Turn off the appliance and remove the mains
plug prior to any care and maintenance work.
Repair works may only be performed by the
authorized customer service.

Pull on the lever of the trigger gun; the de-
vice will switch on.

Check whether the voltage indicated on
the type plate corresponds to the voltage
of the mains supply.

Check the mains connection cable for
damages.
 Check setting at the spray lance.

Appliance ventilation: Switch the appli-
ance on with the high-pressure hose de-
tached and operate (max. 2 minutes) until
the water exits the high-pressure connec-
tion without bubbles. Switch off appliance
and reconnect high-pressure hose.

Check the water supply.

Pull out the sieve in the water connection
using flat-nose pliers and clean under run-
ning water.
Cause: Voltage reduction due to weak mains
supply or when using an extension cable
.
 When switching on, first pull the lever of
the trigger gun and then switch the appli-
ance switch to "I/ON".

Clean high-pressure nozzle: Remove dirt
and debris from the nozzle bore, using a
needle and rinse through with water from
the front.
 Check water flow quantity.

Slight leakage from the appliance pump is
normal. If the leakage increases contact
the authorized customer service.
Frost protection
Maintenance and care
Maintenance
Care
Spare parts
Troubleshooting
Appliance is not running
Pressure does not build up in the appli-
ance
Appliance does not start, motor hums
Strong pressure fluctuations
Appliance is leaking
16 EN