Kärcher K 2.93, Руководство по эксплуатации

Страница: 10 / 20

10
English
! Warning : Vehicle tyres or tyre valves are
susceptible to damage from the high-
pressure jet and may burst. The first indi-
cation of this is a discolouration of the
tyre. Damaged vehicle tyres or tyre
valves endanger life. Ensure that a dis-
tance of at least 30 cm is observed when
cleaning with the jet!
! Cleaning operations which produce oily
waste water, e.g. engine washes, under-
body washes, may only be carried out
using washing stations equipped with an
oil separator.
! Observe a distance of at least 30 cm
when using the jet to clean painted sur-
faces to avoid damaging paintwork.
! Never draw in fluids containing solvents
or undiluted acids and solvents! This in-
cludes petrol, paint thinner and heating
oil. The spray mist thus generated is
highly inflammable, explosive and poi-
sonous. Do not use acetone, undiluted
acids and solvents as they are aggres-
sive towards the materials from which
the appliance is made.
!
Wear suitable clothing and goggles to
protect against back spray containing
water or dirt.
! Never leave the appliance unattended
when it is in operation.
! Warning : This appliance was designed
to be used with detergents which are
supplied or recommended by the manu-
facturer. The use of other detergents or
chemicals may compromise the safety of
the appliance.

Electrical connection
! Make sure that the power cord or exten-
sion cables are not damaged by running
over, pinching, dragging or similar. Pro-
tect the power cords from heat, oil, and
sharp edges.
!
Never use a defective power cord or ex-
tension cable! If the power cord is dam-
aged it must be replaced with a special
power cord available from the manufac-
turer or his customer service.
! Never touch the mains plug and the
socket with wet hands.
! The connection between the power cord
and extension cable must not lie in wa-
ter.
! All current-conducting parts in the work-
ing area must be protected against jet
water.
! The appliance may only be connected to
an electrical supply which has been in-
stalled in accordance with IEC 60364.
! The appliance may only be connected to
alternating current. The voltage must
correspond with the type plate on the ap-
pliance.
! The minimum fuse rating required at the
sokket outlet is 10 A (slow-blow).
! To avoid accidents due to electrical
faults we recommend the use of sockets
with a line-side current-limiting circuit
breaker (max. 30 mA nominal tripping
current).
! Warning : Unsuitable extension cables
can be hazardous. Only use extension
cables outdoors which have been ap-
proved for this purpose and labelled with
a sufficient cable cross-section:
1 -10 m: 1.5 mm
2
10 - 30 m: 2.5 mm
2
! The plug and coupling of the extension
cable used must be watertight.
! Always fully unroll the extension cable
from the cable drum.
Safety devices prevent injury and may not
be modified or bypassed.
The switch prevents unintended starting of
the appliance. Stop the appliance during
breaks or after operation.
The safety catch on the handgun prevents
the appliance from being switched on unin-
tentionally.
Safety Devices
Unit switch
Safety catch