Kärcher HDS-E 8/16-4M, Руководство пользователя

Страница: 26 / 344

– 9
–
Lack of oil

Replenish oil.
–
Leak in the high pressure system
 Check high pressure system and con-
nections for tightness.
–
Lack of water after 2 minutes - the pump
is switched off to prevent dry runs.
 Check water supply, check connec-
tions.
–
Heater contactor fault
 Set the appliance switch to "0/OFF“.
 Turn on the appliance.
–
Error occurs repeatedly.
 Inform Customer Service
–
Lack of water - heater is switched off
 Check water supply, check connec-
tions.
–
No line voltage, see "Appliance is not
running".
–
Heater operation
–
Engine overload/overheat
 Set the appliance switch to "0/OFF“.

Allow device to cool down.

Turn on the appliance.
–
Error occurs repeatedly.
 Inform Customer Service
–
Fault in the voltage supply.
 Check main connections and mains
fuse.
–
Excessive power consumption.
 Check main connections and mains
fuse.
 Inform Customer Service
–
Temperature limiter has got triggered.
 Set the appliance switch to "0/OFF“.
 Allow device to cool down.
 Turn on the appliance.
–
Error occurs repeatedly.
 Inform Customer Service
–
System care detection defective

Inform Customer Service
–
Temperature sensor defective
 Inform Customer Service
–
Service interval
 Perform service work.
Note: Heater can only operate 5 more
hours.
–
System care bottle empty.
 Replace the system care bottle.
Note: Heater operation no longer possible.
–
System care bottle empty.
 Replace the system care bottle.
–
No power
 Check power connection/conduit.
Indicator lamp pump
1x blinking
2x blinking
3x blinking
4x blinking
”Low water” indicator lamp
Indicator lamp "Ready for use"
turns off
Indicator lamp for heater lights up
Engine indicator lamp
2x blinking
3x blinking
4x blinking
Indicator lamp boiler fault
1x blinking
3x blinking
4x blinking
Indicator lamp service
Indicator lamp system care is
illuminated
Indicator lamp system care is
blinking
Appliance is not running
26 EN