background image

– 10

Clean the sieve in the water connection.

Clean the fine filter. 

Check oil level.

Caution

In case of lacteous oil inform Kärcher cus-
tomer service immediately

Clean sieve in the water shortage safe 
guard.

Clean filter at the detergent suck hose.

Oil change.

Perform the pressure test as per manu-
facturer's instructions.

Take out sieve.

Clean sieve in water and reinstall.

Unpressurize the appliance. 

Unscrew the fine filter from the pump 
head.

Remove the fine filter and the filter insert.

Clean the filter with clean water or com-
pressed air.

Reinstall in reverse sequence. 

Loosen covering nut and take off hose.

Take out sieve.

Note:

 If necessary turn in screw M8 appr. 5 

mm inwards and therewith pull out sieve.

Clean sieve in water.

Push sieve inwards.

Put on hose.

Tighten covering nut firmly.

Take out detergent suck supports.

Clean filter in water and reinstall.

Ready a catch bin for appr 1 Litre oil.

Loosen release screw.

Tighten release screw.

Fill oil slowly up to the MAX marking.

Note:

 Air pockets must be able to leak out.

For oil type refer to technical specifica-
tions.

Danger

Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
First pull out the plug from the mains before 
carrying out any tasks on the machine. 

Lack of oil

Replenish oil.

Leak in the high pressure system

Check high pressure system and con-
nections for tightness.

Water shortage

Check water supply, check connec-
tions.

Obstructed reed switch in the water 
shortage safe guard.

Check water shortage safe guard.

Maintenance intervals

Weekly

Monthly

After 500 operating hours, at least annu-
ally

At least every 5 years, recurring

Maintenance Works

Clean the sieve in the water connection

Cleaning the fine filter

Clean sieve in the water shortage safe 
guard

Clean filter at the detergent suck hose

Oil change

Dispose of old oil ecologically or turn in at 
a gathering point.

Troubleshooting

Indicator lamp pump

1x blinking

2x blinking

3x blinking

4x blinking

33

EN

Содержание HDS 7/11-4 M


























Отзывы: