Kärcher HDS 13/24 PE, Оригинальное руководство пользователя

Страница: 27 / 456

– 7
 Charge battery.
 Screw in cell caps.
 Connect high pressure hose and spray
pipe to the hand spray gun.
 Mount the power nozzle on the spray
pipe. Tighten covering nut firmly.
 Connect the high pressure hose to the
high pressure connection point of the
machine.
Figures A-C
For connection values refer to technical
specifications
 Connect the supply hose (minimum
length 7.5 m, minimum diameter 1“) to
the water connection point of the appli-
ance (such as the tap).
 Open the water supply.
Note: The supply hose is not included.
–
When fitted with the appropriate acces-
sories, this high-pressure cleaner can
draw in surface water, e.g. from water
butts or ponds.
–
Suction height max. 1m.

Danger
Never suck in water from a drinking water
container. Never suck in liquids which con-
tain solvents like lacquer thinner, petrol, oil
or unfiltered water. The sealings within the
device are not solvent resistant. The spray
mist of solvents is highly inflammable, ex-
plosive and poisonous.
 Connect suction hose (minimum diame-
ter 1“) with filter (accessory) to the
switching valve for suction water.
 Set dosing value for detergent to "0".
 Open switching valve for suction water.

Danger
Risk of explosion!
Do not spray flammable liquids.

Danger
–
Place the appliance on firm surface.
–
The high pressure cleaner must not be
used by children. (Risk of accident on
account of improper use of the appli-
ance).
–
The high pressure spray generates high
levels of noise when the appliance is in
use. Risk of hearing impairment. Al-
ways use proper ear-protection aids
while working with the appliance.
–
The water jet coming out of the high
pressure nozzle causes the gun to re-
coil. Further, an angular spray pipe can
cause additional torque. Hence hold
the spray pipe and gun firmly.
–
Never direct the water jet on to persons,
animals, the appliance itself or electrical
components.
–
Vehicle tyres/ tyre valves may be
cleaned only with a minimum spray dis-
tance of 30 cm. Otherwise, the high
pressure spray can cause damage to
the vehicle tyre/ tyre valve. The discol-
ouring of the tyre is the fhe first sign of
damage. Damaged vehicle tyres are a
source of danger.
–
Do not spray materials contains asbes-
tos or other health-hazardous sub-
stances.
–
The operator must wear proper safety
gear to be protected against the water
sprays.
–
Pay attention to ensure that all screws
of all connecting hoses are tightened
properly.
–
The lever of the hand spray gun must
not be locked during the operation.
Install hand spray gun
Installing spare high pressure hose
Water connection
Suck in water from vessel
Operation
27 EN