HDS Middle Range / HDS Premium Range
Basic Settings and Service Procedures
Service Manual 04.2008
Page 101 / 127
3.7
Removing the hose reel
3.7.2 Replacing the rotating union seal
(continued)
– Remove half-shell (1) with bearing block (2)
and crank (3).
– Use pliers (6) to remove circlip (7) from the
axle (5).
– Remove rear part of the hose reel (4).
– Renew seals (9) and grease with PFAE grease
(6.288-088). Check axle (5) and connection
piece (8) for traces of wear in the area of the
seals.
1
2
3
7
8
5
4
5
1 Half-shell, hose reel
2 Bearing block, hose reel
3 Crank
4 Hose reel, rear shell
5 Axle, hose reel
6 Pliers, circlip
7 Circlip
8 Connection piece
9 Seal, hose reel (2x)
10 Rear bearing block, hose reel
11 Retaining screw, rear bearing block (2x)
9
Remove hose reel with bearing block
Circlip, rear hose reel section
Seals, hose reel axle
10
11
6