English
15
Î
Connect high pressure hose and spray
pipe to the hand spray gun.
Î
Install the nozzle on the spray pipe in
such a way that the marking is on the
top.
Î
Tighten covering nut firmly.
Î
Connect the high pressure host to the
high pressure connection point of the
machine.
– For connection values refer to technical
specifications
– Observe regulations of water supplier.
According to DIN 1988 it is not allowed to
connect the device directly to the public
water supply. A brief connection through
a pipe interruptor (Order Nr. 6.412-578)
is admissible. The high pressure cleaner
is to be separated from the water supply
after use.
Î
Connect the supply hose to the water
connection point of the machine and at
the water supply point (for e.g. a tap).
Î
Open the water supply.
Note
The supply hose is not included.
Danger
Never suck in water from a drinking water
container. Never suck in liquids which con-
tain solvents like lacquer thinner, petrol, oil
or unfiltered water. The sealings within the
device are not solvent resistant. The spray
mist of solvents is highly inflammable, explo-
sive and poisonous.
Î
Connect suction hose (minimum diame-
ter 3/4“) with filter (accessory) to the wa-
ter connection point.
Î
Set dosing value for detergent to "0".
Î
Remove air from appliance before oper-
ation.
Î
Open the water supply.
Î
Start the engine according to the operat-
ing instructions of the engine manufac-
turer.
Î
To dearate the appliance, unscrew the
nozzle and allow the appliance to run un-
til the water exits in a bubble-free state.
Î
Switch off the appliance and fit the noz-
zle again.
Danger
–
Place the appliance on firm surface.
–
The high pressure cleaner must not be
used by children. (Risk of accident on ac-
count of improper use of the appliance).
–
The high pressure spray generates high
levels of noise when the appliance is in
use. Risk of hearing impairment. Al-
ways use proper ear-protection aids
while working with the appliance.
–
The water jet coming out of the high
pressure nozzle causes the gun to recoil.
Further, an angular spray pipe can cause
additional torque. Hence hold the spray
pipe and gun firmly.
–
Never direct the water jet on to persons,
animals, the appliance itself or electrical
components.
–
Vehicle tyres/ tyre valves may be
cleaned only with a minimum spray dis-
tance of 30 cm. Otherwise, the high pres-
sure spray can cause damage to the
vehicle tyre/ tyre valve. The discolouring
of the tyre is the fhe first sign of damage.
Damaged vehicle tyres are a source of
danger.
–
Do not spray materials contains asbes-
tos or other health-hazardous substanc-
es.
–
The operator must wear proper safety
gear to be protected against the water
sprays.
Install hand spray gun
Water connection
suck in water from vessel
Dearating the appliance
Operation
Содержание HD 801 B
