Kärcher HD 7.9/72 Ec, Оригинальное руководство пользователя

Страница: 10 / 44

– 8
The working pressure can be changed by
using different high-pressure nozzles.
 Select a nozzle from the table above.
 Unscrew the union nut from the spray
lance.
 Replace nozzle.
 Screw on and tighten the union nut.
Note:
This method of pressure adjustment al-
ways means that the full flow rate of 1800 l/
h is always available.
 Release the lever on the trigger gun.
 Set the appliance switch to "0".
 Shut off water supply.
 Activate hand spray gun until device is
pressure less.
 Use the safety catch to secure the
handgun lever.
 Remove the water inlet hose from the
appliance.
 Pull out the mains plug.
 Stow away the mains cable, the high-
pressure hose and accessory at the ap-
pliance.
몇
WARNING
Risk of damage! Freezing water in the ap-
pliance can destroy parts of the appliance.
Store the appliance in a heated room dur-
ing winter or empty it. During longer breaks
in operation, it is advisable to pump in anti-
frost agents into the appliance.

Screw off water supply hose and high
pressure hose.
 Blow through machine with com-
pressed air.
Note:
Observe handling instructions of the anti-
freeze agent manufacturer.
 Pump in conventional frost protection
agents through the appliance.
A certain corrosion protection is achieved
with this as well.
몇
CAUTION
Risk of personal injury or damage! Mind the
weight of the appliance during transport.
 Pull the actuation lever of the parking
brake all the way to the back.
 Press the actuation lever of the parking
brake completely to the front.
 Connect the lifting device in the center
of the strut to load by crane.

DANGER
Risk of injury due to machine dropping.
– Adhere to the local accident prevention
guidelines and safety notes.
– Check the appliance for crane loading
for damage prior to each transport by
crane.
– Check the lifting unit for damage prior to
each transport by crane.
– Only lift up the appliance by this mech-
anism when loading by crane.
– Do not use stop chains.
– Protect the lifting device from inadvert-
ent load release.
Changing working pressure
Pressure
MPa (bar) Nozzle
size Order number
Flat jet nozzles
50 (500)
15060 5.765-263.0
35 (350) 15075 2.113-073.0
25 (250) 15095 2.113-075.0
15 (150) 15120 2.113-077.0
Detail nozzles
50 (500)
060 5.765-264.0
35 (350) 075 2.113-074.0
25 (250) 095 2.113-076.0
15 (150) 120 2.113-078.0
Finish operation
Frost protection
Drain water
Flush device with anti-freeze agent
TRANSPORT
Driving
Stopping
Transport by crane
Safety information about cranes
10 EN