Kärcher HD 5/12 CX, Руководство пользователя

Страница: 22 / 352

– 5
 Suspend end of suction hose in a con-
tainer filled with detergent.
 Set nozzle to "CHEM".
 Spray the detergent sparingly on the
dry surface and allow it to react, but not
to dry.
 Spray off loosened dirt with the high-
pressure ray.
 Set the suction flow on the detergent fil-
ter to the maximum quantity after oper-
ation.
 Start the appliance and rinse for one
minute.
 Close the hand spray gun.
The appliance switches off.
 Secure the trigger gun. To do so, push
the safety catch towards the front.
Note:
When switching off the appliance, the water
pressure is reduced by approx. 70%. This
reduces the actuating force of the hand
spray gun and the service life of the appli-
ance is increased.
After the interruption:
 Release the trigger gun. To do so, push
the safety catch towards the back.
 Open the hand spray gun.
The appliance will switch on again.
 Shut off water supply.
 Open the hand spray gun.
 Switch on the pump with the power
switch and allow to run for about 5-10
seconds.
 Close the hand spray gun.
 Set the appliance switch to "0/OFF“.
 Pull main plug out of socket with dry
hands only.
 Remove water connection.
 Activate hand spray gun until device is
pressure less.
 Secure the trigger gun. To do so, push
the safety catch towards the front.
 Place the spray lance with the trigger
gun into the quiver for the spray lance
and snap it into place in the spray lance
holder.
 Wind the connection cable around the
cable holder.
 Coil up the high pressure hose, hang it
over the hose rack and secure it by
means of the rubber band.
or
Coil up the high-pressure hose on the
hose drum. Fold down the handle of the
crank.
 Fasten the plug with the mounted clip.
 Press the unlocking device of the push
handle and slide the push handle in.
ATTENTION
Frost will destroy the not completely water
drained device.
Store the appliance in a frost free area.
 Drain water.
 Pump in conventional frost protection
agents through the appliance.
Note:
Use normal glycol-based anti-freezing
agents for automobiles.
Observe handling instructions of the anti-
freeze agent manufacturer.
 Operate device for max. 1 minute until
the pump and conduits are empty.
몇
CAUTION
Risk of personal injury or damage! Mind the
weight of the appliance during transport.
ATTENTION
Protect the trigger from damage during
transport.
 In order to transport the appliance over
longer distances, pull it behind you
holding on to the push handle.
 In order to carry the appliance, hold on
to the handles.
Recommended cleaning method
Interrupting operation
Turn off the appliance
Storing the Appliance
Frost protection
If you cannot store it in a frost-free
place:
Transport
22 EN